The VHT-1 HDBaseT Video Transmitter delivers an HDMI 1080p video signal over Cat5e/6 up to 230ft (70m) and 4K up to 115ft (35m) to the VHR-1 HDBaseT Video Receiver. The VHT-1 can be powered by the included power supply. VHT-1 powers the VHR-1 through the Cat5e/6 cable using PoH (Power over HDbaseT). It also transmits an IR or RS-232 signal through the same Cat5e/6 cable to control the remote display or projector that’s connected to the VHR-1 receiver.
| Power Supply | 24VDC 1.25A |
| Dimensions HxWxD | 1.18in(30mm) x 4.92in(125mm) x 3.03in(77mm) |
| Weight | 0.51 lbs (0.232kg) |
| Operating Temperature | 0 to +40°C / +32 to +104°F |
| Operating Humidity | 5% to 95% Non-condensing |
| Video Input | One HDMI |
| Video Output | One HDBAseT (PoH) (RJ45) |
| Output Level | T.M.D.S. 2.9V~3.3V |
| Output Impedance | 100Ω (Differential) |
| Gain | 0dB |
| Bandwidth | 10.2Gbit/s |
| Video Signal | HDMI (or DVI-D) |
| Resolution Range | Up to 4K@30Hz |
| HDBaseT Transmission Distance | 1080P@60Hz ≤ 230ft (70m) 4K@30Hz ≤ 115ft (35m) |
| EDID Management | Built-in EDID data and manual EDID management |
| HDCP | Supports up to HDCP 2.2 |
| IR In | One, 3.5mm jack, compatible with industry standard IR repeaters and receivers |
| Serial (RS-232) Port | One, Bi-directional Female DB-9 |
| Warranty | Three Years (Parts & Labor) |
All features and specifications subject to change without notice.
